If you use ultrasn0w or Gevey SIM to unlock your iPhone, here’s the ultimate guide to safely update to iOS 6.0.1 while preserving your baseband.
NOTE: If you’re tired of messing around with jailbreaking/unlocking, AT&T iPhone can now be permanently unlocked!
You’ve probably read the following countless times, but if you’re new to using locked iPhone, it may be worthwhile to read and understand the points below:
- Sn0wbreeze doesn’t unlock your iPhone, but rather it builds custom firmware that will preserve baseband that can be unlocked either using ultrasn0w or Gevey SIM.
- There’s no known software method to downgrade your baseband, once it’s updated, there’s no turning back. However, we do offer permanent factory unlock for AT&T iPhones and iPhones on other countries network.
- With sn0wbreeze 2.9.7 (Windows only), the jailbreak for iOS 6.0.1 is currently tethered for iPhone 4 and earlier iPhone models (3GS with old bootrom is always untethered). A5 devices such as iPhone 4S is not supported at this time.
- If you’ve downgraded your baseband chip with us, this guide will be useful for you. Under no circumstances you should restore using stock firmware.
What you need:
- iPhone 4 with baseband 01.59.00 (supported by ultrasn0w) or 02.10.4, 03.10.01 and 04.10.01 (unlock with Gevey SIM) OR iPhone 3GS with baseband 05.11.07, 05.12.01, 05.13.04 or iPad baseband 06.15.00.
- Sn0wbreeze 2.9.7.
- Ultrasn0w Fixer for iOS 6.0.1.
- Ultrasn0w 1.2.7 (ultrasn0w 1.2.8 may come soon).
Note: Currently, there’s still no way to preserve iPhone 4S’ baseband. Check our Store for possible official unlocking options.
Before you begin, always remember to backup your iPhone.
WARNING: Proceed at your own risks. This guide is for reference only.
Part One: Building and Installing Custom iOS 6.0.1 Firmware (Baseband Preserved)
The first part involves the building and installing custom iOS 6.0.1 firmware. ‘Hacktivation’ is needed if you don’t have the official SIM card. The second part of this tutorial explains the steps to unlock your iPhone: Part 2(a) is using ultrasn0w for supported baseband only or Part 2(b) is for Gevey SIM for iPhone 4.
You can also download these ready made custom iOS 6.0.1 firmware for iPhone 3GS or iPhone 4 (will upload soon). Mac users can use the latest redsn0w to pawn DFU before restoring.
2. Download Sn0wbreeze 2.9.7 from ih8sn0w.com.
3. Start sn0wbreeze.
4. Click browse and locate the original iOS 6.0.1 that you just downloaded.
5. Sn0wbreeze will identify the IPSW file. Click Next.
6. Choose one of the modes below:
- iFaith Mode: Builds custom iOS and stitches it with your saved SHSH.
- Expert Mode: Preserves your baseband, will jailbreak and hacktivate (activate).
- Simple Mode (recommended): Preserves your baseband, will jailbreak and hacktivate.
7. Now it will ask you whether you want to hacktivate or not. Select “Yes”. Now wait until sn0wbreeze completes building the custom iOS 6.0.1 for you.
Once the custom iOS 6.0.1 is ready you will find it on your desktop. Before restoring your iPhone, you MUST put your iPhone into pwned DFU mode. This allows it to accept custom firmware. Otherwise, you’ll get an error message during restore. iREB will appear as soon as custom firmware is built. You can also access it on the menu bar of sn0wbreeze.
To begin restoring, be sure your iPhone is already in pwned DFU mode (black screen) then launch iTunes, press shift on your keyboard and click restore. Select the custom firmware that was just created. To be sure, the file name always begin with sn0wbreeze_iPhone_xxxxxxx.
Part Two (a): Unlock with ultrasn0w
1.2.7 from Cydia [for supported baseband only]
There’s no official ultrasn0w for iOS 6.0.1 yet, so we’ll need to install ultrasn0w fixer for iOS 6.0.1 first.
1. Launch Cydia and add the following repo by going to Manage > Sources > Edit > Add:
2. Search for ultrasn0w fixer for iOS 6.0.1 and install it.
3. Finally, search for ultrasn0w 1.2.7 and install that too.
4. Reboot your device. Remember to use iBooty to boot your iPhone!
Part Two (b): Unlock with Gevey SIM [for iPhone 4 baseband 02.10.01, 03.10.01 or 04.10.01 only]
1. Eject your SIM tray and reboot your iPhone.
2. Once restarted, unlock your screen. Turn off 3G and cell data (you can turn these on later). Insert your SIM tray along with your SIM card and Gevey SIM.
3. Wait for Accept Screen. Tap Accept.
4. You will see No Service (in iOS 4.x, you will see one signal bar). Wait for 15-20 seconds and dial 112. Hang up after 1-2 seconds.
5. Turn on Airplane Mode and wait for ‘NO SIM CARD INSTALLED’ message. Turn off Airplane Mode and you will see ‘SIM FAILURE’ and tap OK. Your iPhone will connect to your network now.
That’s it! Your iPhone is now unlocked on iOS 6.0.1 along with tethered jailbreak.
If you find this post useful, please do us a small favor by clicking ‘LIKE’ or ‘Recommend on Google+’ below.